AUTOPOT - EASY2GO SELF-IRRIGATING VALVE KIT

With easy2GO you can turn any gardening tray into an AutoPot system! The easy2GO kit will keep your plants watered automatically using a simple flat-based tray and reservoir.

The easy2GO kit is placed directly on the tray with the pot plants and distributes the water to the pots from below. Ideal for growers who wish to use very large pots or simply keep several smaller pots irrigated in one tray.

Multiple kits can be connected from one reservoir to keep multiple plants watered and the easy2GO Kit can be installed anywhere; in your home, greenhouse, conservatory or balcony.

Going on holiday? The easy2GO kit is the ultimate watering kit for leaving plants watered in our absence. Unlike other holiday watering kits, the easy2GO kit meets the needs of plants without the need for a timer or electricity.

This economical and flexible system can be assembled in minutes and contains all
the necessary fittings for connection to a reservoir of your choice. You simply need a water container with a minimum capacity of 30 litres and a flat-based gardening tray with a minimum depth of 30 mm.

Easy2GO Kit in 4 easy steps:

1. Connect the tank to the easy2GO kit
2. Place the easy2GO kit on a levelled tray
3. Place your plant pots in the garden tray
4. Fill the reservoir with water and liquid fertiliser (if necessary)

Our tips for using the easy2GO Kit:

• Use the spirit level on the easy2GO kit to make sure the tray is level.
• Place washed gravel/clay pebbles or similar in the bottom of each pot to promote drainage.
• For best results, we recommend mineral fertilisers. Do not use organic fertilisers, as they have a tendency to block small pipes.
• Always place the easy2GO kit directly on the trays, never place it on a capillary mat.