Available
FRAL - EVAPORATIVE COOLER EVC 12000 WITH UV LAMP | 12000 mc/h
Cod. EVC120.001
Brand: FRAL DEUMIDIFICAZIONE
The evaporative cool er is a device that uses the principle of water evaporation to reduce the temperature of the ambient air.
The evaporative cooler consists mainly of a panel in which...
Standard price
€2.076,07 VAT included(22%)
Recalculation in progress …
The evaporative cool er is a device that uses the principle of water evaporation to reduce the temperature of the ambient air.
The evaporative cooler consists mainly of a panel in which water is distributed through a pump. The warm air in the room is drawn through this humid material by a fan.
The cooling process starts when the warm air absorbs the moisture present in the porous material.
The evaporated water absorbs heat from the air, reducing its temperature. As a result, cooler air is blown into the room through grilles or openings, providing a pleasant cooling effect.
It is important to note that evaporative cooling works best in areas with low humidity, as the air has a greater capacity to absorb moisture. In very humid environments, the ability of the air to absorb additional moisture is limited, thus reducing the effectiveness of the cooling process.
Adiabatic cooling, also referred to as evaporative cooling, is increasingly used to cool large and medium-sized buildings, and is an environmentally sustainable and economical choice that uses very little electricity, unlike air conditioners (which are also polluting).
Available to order 10-15 days
The evaporative cooler consists mainly of a panel in which water is distributed through a pump. The warm air in the room is drawn through this humid material by a fan.
The cooling process starts when the warm air absorbs the moisture present in the porous material.
The evaporated water absorbs heat from the air, reducing its temperature. As a result, cooler air is blown into the room through grilles or openings, providing a pleasant cooling effect.
It is important to note that evaporative cooling works best in areas with low humidity, as the air has a greater capacity to absorb moisture. In very humid environments, the ability of the air to absorb additional moisture is limited, thus reducing the effectiveness of the cooling process.
Adiabatic cooling, also referred to as evaporative cooling, is increasingly used to cool large and medium-sized buildings, and is an environmentally sustainable and economical choice that uses very little electricity, unlike air conditioners (which are also polluting).
Main features evaporative cooler
- Large cooling capacity
- The EVC evaporative cooler range is very efficient and easy to use
- Installation takes only a few minutes and the device is immediately ready for use
- UV lamp included for water sterilisation and to prevent algae growth
- Corrosion-resistant casing for long service life
- Three-speed fan
- Very quiet thanks to state-of-the-art electronic fans
- Very low energy consumption
- Plug and Play
- On-board digital control panel and remote control
- Very capacious tank and connection for automatic refilling
- Easy to move thanks to 4 sturdy wheels
- Automatic restart after power failure
- Washable air filter
Technical specifications:
- Air flow rate 12,000 m³/h
- Maximum covered area 250 m²
- UV lamp yes
- Fan speed 3
- Water tank capacity 90 l
- Direct water connection yes
- Water level control yes
- Dimensions (WxHxD) 925 x 1440 x 580 mm
- Weight 40 kg
Available to order 10-15 days
-
92x144x58 cm (WxLxH)
-
1
-
250
-
12000
-
90
