IMPRESIND - 5-SPEED SINGLE-PHASE REGULATOR
Recalculation in progress … R-E series transformer controllers are used to regulate the speed of single-phase voltage-controlled fans.
Suitable for up to 2 Eliturbos
Level regulation is done manually via the integrated 5-stage switch.
The additional 230 V voltage output (terminals 1 and 2) is active when the fan is operating at level 1, 2, 3, 4 or 5 and can be used, for example, for a signal lamp or damper control (max. contact load 1 A).
Suitable for up to 2 Eliturbos
Level regulation is done manually via the integrated 5-stage switch.
The additional 230 V voltage output (terminals 1 and 2) is active when the fan is operating at level 1, 2, 3, 4 or 5 and can be used, for example, for a signal lamp or damper control (max. contact load 1 A).
Technical data:
- Measured current (A) 3.5
- Max. line fuse T4
- Max. power dissipation (W) 30
- Weight 3.5 kg
- IP54 protection
Yield times: to be checked with the manufacturer.
R-E series transformer controllers are used to regulate the speed of single-phase voltage-controlled fans.
Level adjustment is done manually via the integrated 5-stage switch.
Suitable for up to 4 Eliturbos
The additional 230 V voltage output (terminals 1 and 2) is active when the fan is operating at level 1, 2, 3, 4 or 5 and can be used, for example, for a signal lamp or damper control (max. contact load 1 A).
Level adjustment is done manually via the integrated 5-stage switch.
Suitable for up to 4 Eliturbos
The additional 230 V voltage output (terminals 1 and 2) is active when the fan is operating at level 1, 2, 3, 4 or 5 and can be used, for example, for a signal lamp or damper control (max. contact load 1 A).
Technical data:
- Measured current (A) 6
- Max. line fuse T8
- Max. power dissipation (W) 35
- Weight 5Kg
- Protection IP54
Yield times: to be checked with the manufacturer.
R-E series transformer controllers are used to regulate the speed of single-phase voltage-controlled fans.
Level adjustment is done manually via the integrated 5-stage switch.
Suitable for up to 6 Eliturbos
The additional 230 V voltage output (terminals 1 and 2) is active when the fan is operating at level 1, 2, 3, 4 or 5 and can be used, for example, for a signal lamp or damper control (max. contact load 1 A).
Level adjustment is done manually via the integrated 5-stage switch.
Suitable for up to 6 Eliturbos
The additional 230 V voltage output (terminals 1 and 2) is active when the fan is operating at level 1, 2, 3, 4 or 5 and can be used, for example, for a signal lamp or damper control (max. contact load 1 A).
Technical data:
- Measured current (A) 9
- Max. line fuse T16
- Max. power dissipation (W) 50
- Weight 10.5 kg
- Protection IP54
R-E series transformer controllers are used to regulate the speed of single-phase voltage-controlled fans.
Level adjustment is done manually via the integrated 5-stage switch.
Suitable for up to 9 Eliturbos
The additional 230 V voltage output (terminals 1 and 2) is active when the fan is operating at level 1, 2, 3, 4 or 5 and can be used, for example, for a signal lamp or damper control (max. contact load 1 A).
Level adjustment is done manually via the integrated 5-stage switch.
Suitable for up to 9 Eliturbos
The additional 230 V voltage output (terminals 1 and 2) is active when the fan is operating at level 1, 2, 3, 4 or 5 and can be used, for example, for a signal lamp or damper control (max. contact load 1 A).
Technical data:
- Measured current (A) 14
- Max. line fuse T20
- Max. power dissipation (W) 105
- Weight 12.5 kg
- IP54 protection
Cod. E3MRPL
€ 1.034,87 VAT included(22%)
€ 900,49 VAT included(22%)
