The water-cooled OptiClimate cools the air using water as a cooling medium and heats it using ceramic heating elements. OptiClimate has a water inlet and outlet.The inlet is connected to the water...
The water-cooled OptiClimate cools the air using water as a cooling medium and heats it using ceramic heating elements. OptiClimate has a water inlet and outlet.The inlet is connected to the water mains. Cold water is used to cool the air, raising the water temperature from 35°C to 50°C. This hot water is then channelled through the water outlet or recycled.
This is ideal for cooling objects near water sources such as canal houses, houseboats, yachts, swimming pools or greenhouses. The water-cooled OptiClimate is also perfect for historic buildings where an outdoor unit cannot be installed. If your house has a swimming pool, you can use a water-cooled OptiClimate to cool your house and heat your pool.
The water-cooled OptiClimate is available in PRO3 and PRO4 models. The specifications of both models differ, and the dehumidification function of a PRO3 and a PRO4 works slightly differently.
The OptiClimate PRO3 dehumidifies by continuously finding the right balance between heating and cooling. This allows the dehumidification function to work even after the desired temperature has been reached. The dehumidification capacity of the PRO3 is more than sufficient for most applications. This is one and a half to two times more efficient than a building dryer.
OptiClimate Pro = 5 systems in one machine
Cooling + Heating + Dehumidification + Circulation + Air Filtration
It is capable of dissipating the heat produced by 10 1000W lamps as well as handling the following environmental parameters:
Technical specifications:
Programmable temperature between 16° and 32° C
Relative humidity programmable between 35% and 95%.
Mounts 250mm Flofilter flange
Cooling capacity: 3.5 kW
Dimensions of indoor unit: 100 x 500 x 420 mm
Weight of indoor unit: 60 kg
Extractor flow rate: 700mc/h
Voltage: 230V
Power consumption: 740W
Dehumidification capacity: 55 litres per 24 hours*.
Heating elements: 2x1500W
Phase: 1 or 3
* based on 80% humidity and an ambient temperature of 30 degrees Celsius
Recalculation in progress … 
