TERRA AQUATICA - FLASHCLEAN
Recalculation in progress … Unique on the market, it rinses and improves substrate quality and system.
From rejuvenating indoor plants to maximising yields and potential in commercial hydroponics, FlashClean is one of the most powerful tools for growers!Eventually, all growing systems will create fertiliser residue as a natural part of the growing process. This build-up leads to a build-up of salts that may block drippers, create unseen accumulations on top of the soil or substrate, and ultimately cause your plants excessive stress and even root damage. With today's highly concentrated fertilisers, and the high EC levels held in many systems, nutrient blockage can be an invisible limitation for your growing; FlashClean solves these problems and many more:
- Dissolves accumulated salts from fertilisers
- Corrects fertiliser balance
- Solves nutrient uptake blockages
- Nourishes microbial life and recharges soil and coco
- Maximises final growth phase (especially with FinalPart)
Specially developed to dissolve mineral salts, FlashClean unlocks the bonds between minerals and substrate and allows you to flush out excess residues. This release helps plants metabolise the remaining fertiliser better, especially in the crucial week just before harvest.
Unlike other flushes and final products on the market, FlashClean is not an acid, it is not enzyme-based, and it does not release magnesium or other mineral additives into your system - this makes it especially flexible: with FlashClean you can give your system, and your plants, an incredible clean at any time and at any stage of growth.
No matter what type of system you are using - indoors or outdoors, without substrate or in hydroponics, pots or grow beds, FlashClean is easy to use: just mix it with pH-corrected water and apply.
HOW TO USE IT:
In hydroponic systems:
- To reset and restore when changing fertilisers, or after an excess or blockage: Add 1.5 to 3 ml/L in pH-corrected water. Use a smaller amount for young or fragile plants, and a larger amount for more vigorous plants close to harvest. Recirculate in your system for 24 hours with only FlashClean before adding fertiliser to your tank. There is no need to empty the tank first.
- As a final 'flush' / after FinalPart: change the old solution and add 1.5 to 3 ml/L with pH controlled water for at least two days before harvest to increase the sugar level.
In soil and in mixtures with inert substrate:
- To reset and restore your substrate, or after a nutrient blockage: Every 15 days fill a watering can with water and 1.5 to 3 ml/L of FlashClean. Water until the water starts to run out of the bottom of the pot. Start normal fertilisation again with the next watering.
- As final 'flush' / after FinalPart: Use 3 ml/L of FlashClean instead of fertiliser during the last two days before harvest to increase sugar levels and avoid losing aroma and active ingredients with a long water-only flush.
Unique on the market, it rinses and improves substrate quality and system.
From rejuvenating indoor plants to maximising yields and potential in commercial hydroponics, FlashClean is one of the most powerful tools for growers!Eventually, all growing systems will create fertiliser residue as a natural part of the growing process. This build-up leads to a build-up of salts that can block drippers, create unseen build-up on top of the soil or substrate, and ultimately cause your plants excess stress and even root damage. With today's highly concentrated fertilisers, and the high EC levels held in many systems, nutrient lock-up can be an invisible limitation to your growing; FlashClean solves these problems and many more:
- Dissolves accumulated salts from fertilisers
- Corrects fertiliser balance
- Solves nutrient uptake blockages
- Nourishes microbial life and recharges soil and coco
- Maximises final growth phase (especially with FinalPart)
Specially developed to dissolve mineral salts, FlashClean unlocks the bonds between minerals and substrate and allows you to flush out excess residues. This release helps plants metabolise leftover fertiliser better, especially in the crucial week just before harvest.
Unlike other flushes and final products on the market, FlashClean is not an acid, it is not enzyme-based, and it does not release magnesium or other mineral additives into your system - this makes it especially flexible: with FlashClean you can give your system, and your plants, an incredible clean at any time and at any stage of growth.
No matter what type of system you are using - indoors or outdoors, without substrate or in hydroponics, pots or grow beds, FlashClean is easy to use: just mix it with pH-corrected water and apply.
HOW TO USE IT:
In hydroponic systems:
- To reset and restore when changing fertilisers, or after an excess or blockage: Add 1.5 to 3 ml/L in pH-corrected water. Use a smaller amount for young or fragile plants, and a larger amount for more vigorous plants close to harvest. Recirculate in your system for 24 hours with only FlashClean before adding fertiliser to your tank. There is no need to empty the tank first.
- As a final 'flush' / after FinalPart: change the old solution and add 1.5 to 3 ml/L with pH controlled water for at least two days before harvest to increase the sugar level.
In soil and in mixtures with inert substrate:
- To reset and restore your substrate, or after a nutrient blockage: Every 15 days fill a watering can with water and 1.5 to 3 ml/L of FlashClean. Water until the water starts to run out of the bottom of the pot. Start normal fertilisation again with the next watering.
- As final 'flush' / after FinalPart: Use 3 ml/L of FlashClean instead of fertiliser during the last two days before harvest to increase sugar levels and avoid losing aroma and active ingredients with a long water-only flush.
Unique on the market, it rinses and improves substrate quality and system.
From rejuvenating indoor plants to maximising yields and potential in commercial hydroponics, FlashClean is one of the most powerful tools for growers!Eventually, all growing systems will create fertiliser residue as a natural part of the growing process. This build-up leads to a build-up of salts that can block drippers, create unseen build-up on top of the soil or substrate, and ultimately cause your plants excess stress and even root damage. With today's highly concentrated fertilisers, and the high EC levels held in many systems, nutrient lock-up can be an invisible limitation to your growing; FlashClean solves these problems and many more:
- Dissolves accumulated salts from fertilisers
- Corrects fertiliser balance
- Solves nutrient uptake blockages
- Nourishes microbial life and recharges soil and coco
- Maximises final growth phase (especially with FinalPart)
Specially developed to dissolve mineral salts, FlashClean unlocks the bonds between minerals and substrate and allows you to flush out excess residues. This release helps plants metabolise leftover fertiliser better, especially in the crucial week just before harvest.
Unlike other flushes and final products on the market, FlashClean is not an acid, it is not enzyme-based, and it does not release magnesium or other mineral additives into your system - this makes it especially flexible: with FlashClean you can give your system, and your plants, an incredible clean at any time and at any stage of growth.
No matter what type of system you are using - indoors or outdoors, without substrate or in hydroponics, pots or grow beds, FlashClean is easy to use: just mix it with pH-corrected water and apply.
HOW TO USE IT:
In hydroponic systems:
- To reset and restore when changing fertilisers, or after an excess or blockage: Add 1.5 to 3 ml/L in pH-corrected water. Use a smaller amount for young or fragile plants, and a larger amount for more vigorous plants close to harvest. Recirculate in your system for 24 hours with only FlashClean before adding fertiliser to your tank. There is no need to empty the tank first.
- As a final 'flush' / after FinalPart: change the old solution and add 1.5 to 3 ml/L with pH controlled water for at least two days before harvest to increase the sugar level.
In soil and in mixtures with inert substrate:
- To reset and restore your substrate, or after a nutrient blockage: Every 15 days fill a watering can with water and 1.5 to 3 ml/L of FlashClean. Water until the water starts to run out of the bottom of the pot. Start normal fertilisation again with the next watering.
- As final 'flush' / after FinalPart: Use 3 ml/L of FlashClean instead of fertiliser during the last two days before harvest to increase sugar levels and avoid losing aroma and active ingredients with a long water-only flush.
Unique on the market, it rinses and improves substrate quality and system.
From rejuvenating indoor plants to maximising yields and potential in commercial hydroponics, FlashClean is one of the most powerful tools for growers!Eventually, all growing systems will create fertiliser residue as a natural part of the growing process. This build-up leads to a build-up of salts that can block drippers, create unseen build-up on top of the soil or substrate, and ultimately cause your plants excess stress and even root damage. With today's highly concentrated fertilisers, and the high EC levels held in many systems, nutrient lock-up can be an invisible limitation to your growing; FlashClean solves these problems and many more:
- Dissolves accumulated salts from fertilisers
- Corrects fertiliser balance
- Solves nutrient uptake blockages
- Nourishes microbial life and recharges soil and coco
- Maximises final growth phase (especially with FinalPart)
Specially developed to dissolve mineral salts, FlashClean unlocks the bonds between minerals and substrate and allows you to flush out excess residues. This release helps plants metabolise leftover fertiliser better, especially in the crucial week just before harvest.
Unlike other flushes and final products on the market, FlashClean is not an acid, it is not enzyme-based, and it does not release magnesium or other mineral additives into your system - this makes it especially flexible: with FlashClean you can give your system, and your plants, an incredible clean at any time and at any stage of growth.
No matter what type of system you are using - indoors or outdoors, without substrate or in hydroponics, pots or grow beds, FlashClean is easy to use: just mix it with pH-corrected water and apply.
HOW TO USE IT:
In hydroponic systems:
- To reset and restore when changing fertilisers, or after an excess or blockage: Add 1.5 to 3 ml/L in pH-corrected water. Use a smaller amount for young or fragile plants, and a larger amount for more vigorous plants close to harvest. Recirculate in your system for 24 hours with only FlashClean before adding fertiliser to your tank. There is no need to empty the tank first.
- As a final 'flush' / after FinalPart: change the old solution and add 1.5 to 3 ml/L with pH controlled water for at least two days before harvest to increase the sugar level.
In soil and in mixtures with inert substrate:
- To reset and restore your substrate, or after a nutrient blockage: Every 15 days fill a watering can with water and 1.5 to 3 ml/L of FlashClean. Water until the water starts to run out of the bottom of the pot. Start normal fertilisation again with the next watering.
- As final 'flush' / after FinalPart: Use 3 ml/L of FlashClean instead of fertiliser during the last two days before harvest to increase sugar levels and avoid losing aroma and active ingredients with a long water-only flush.
