TROLMASTER - EXPANSION STATION FOR HYDRO-X 4RS-1

TrolMaster's 4RS-1 is a universal 4-output power expansion module. It can be used with any of TrolMaster's 'plug-in' style device modules to expand the number of devices that can be controlled by the Hydro-x.

A single 120-240 volt "trigger" cable on the 4RS-1 connects to the device/control module. When the device module is activated by the Hydro-x, the 4RS-1 trigger cable will turn on each of the 4 sockets on the 4RS-1 with a 3 second delay between activation of each output. This minimises high start-ups (inrush current) and allows up to 4 devices to be safely controlled.

The 4RS-1 must be installed with a 120/240 volt power supply circuit (up to 50 amps at 240 vac). The three-wire terminals inside the unit accept wires up to #6 AWG, facilitating connections to the power source.

Key features TrolMaster Expansion Station:

• Individual power relay (25 A per socket)
• Intervals of 3 seconds as delay to reduce current peaks.

Technical specifications TrolMasterExpansion Station:

• Main supply voltage: 240 V
• Number of sockets: 4
• Maximum relay amperage: 25A
• Operating temperature: 41-140°F
• Operating humidity: 0-99% non-condensing
• Package dimensions: 275 mm x 255 mm x 95 mm
• Weight per package: 1.50 kg

Package contents:

• 1 x Expansion Station 4