OPTICLIMATE - 15000 PRO3 EX SPLIT (EXTENDED REACH) INVERTER - AIR COOLED

The air-cooled OptiClimate(OptiClimate Split) works on the same principle as the water-cooled design. The only difference is that OptiClimate Split uses air as the coolant instead of water. OptiClimate Split has an outdoor unit (split unit) at a maximum distance of 30 metres.

The split unit comes with hoses and quick couplings. Compared to its competitors, OptiClimate has the unique property that it can dehumidify even after the desired temperature has been reached.

The air-cooled OptiClimate is available in PRO3 and PRO4 models. The specifications of both models differ, and the dehumidification function of a PRO3 and a PRO4 works slightly differently.

The OptiClimate PRO3 dehumidifies by continuously finding the right balance between heating and cooling. This allows the dehumidification function to work even after the desired temperature has been reached. The dehumidification capacity of the PRO3 is more than sufficient for most applications. This is one and a half to two times more efficient than a building dryer.
OptiClimate Pro = 5 systems in one machine

Cooling + Heating + Dehumidification + Circulation + Air Filtration

Opticlimate Split units are also available in the EX (Long Range) model. The EX model can bridge distances of up to 30 metres between the indoor and outdoor unit. It includes a 15-metre quick-connect cooling hose, which consists of a set of two hoses.
If a longer cooling hose is needed, it can be ordered, up to a maximum distance of 30 metres.

The OptiClimate 15000 PRO3 Split Inverter is much more electricity efficient and has a much higher dehumidification capacity than previous models.

Inverter technology ensures uniform temperature and humidity control. Inverter allows the OptiClimate to continuously adjust the temperature evenly to the set temperature. The OptiClimate Inverter reacts directly to even the slightest difference between the set temperature and the actual temperature.Inverter technology prevents frequent switching on and off of the compressor, thus preventing power peaks. The OptiClimate Inverter therefore uses less water and energy and creates more uniform temperature and humidity levels. This technology also uses 'soft start' and the compressor speed is increased gradually, avoiding a high starting current.
The OptiClimate Inverter has the unique property of being multi-phase, which means that the compressor can be connected to either 230-240 V single-phase or 400 V three-phase.

It is capable of dissipating the heat produced by 15 1000W lamps as well as handling the following environmental parameters:

Technical specifications:

• Programmable temperature between 16° and 32° C
• Relative humidity programmable between 35% and 95%.
• Mounts 315mm Flofilter flange
• Extractor flow rate: 2500mc/h
• Cooling capacity: 15 kW (increase + 8%)
• Maximum energy saving compared to PRO3: 73%.
• Indoor unit dimensions: 1230 x 900 x 545 mm
• Weight of indoor unit: 152 kg
• Dimensions of outdoor unit: 950 x 360 x 1230 mm
• Weight outdoor unit: 68.5 kg
• Voltage: 230V - 400V
• Power consumption: 3700W
• Dehumidification capacity: 270 litres per 24 hours
• Heating elements: 3x2700W
• Phase: 1 or 3
• Split unit: Yes
• Refrigerant: R407C
• Split unit extension: yes up to 30m (15m set as standard)

* based on 80% humidity and an ambient temperature of 30 degrees Celsius

https://youtu.be/3mk9wUP_A5c

CAN BE PURCHASED TO ORDER WITH ACCESSORIES TO BE SIZED ACCORDING TO THE CULTIVATION SYSTEM.